Manuels
Manuel du propriétaire Allez Sprint
Limites de poids structurelles
Cargo |
Structurel (lb/kg) | |
---|---|---|
Arrière (lb/kg) | ||
Cadre | 5 / 2.3 | 275 / 125 |
*Veuillez noter que les cadres sont conçus pour supporter un poids total de 124,7 kg (275 lb) comprenant le cycliste et son équipement. Si votre vélo comportedes composants en carbone (tige de selle, selle ou guidon), veuillez respecter la limite de poids des composants.
Torque Specs
# on schematic | Part # | Description | Tool | In-lbf | Nm |
---|---|---|---|---|---|
2 | S202300018 | Fork for sizes 44, 49, 52 | |||
2 | S202300019 | Fork for sizes 54, 56 | |||
2 | S202300020 | Fork for sizes 58, 59, 61 | |||
3 | S211900001 | Front derailleur hanger | 2.5 mm | 18 | 2 |
4 | S159900006 | Rear derailleur hanger | 4 mm | 40 | 4.5 |
5 | S214700002 | Seatpost clamp kit | 4 mm | 55 | 6.2 |
Seatpost saddle clamp | 5 mm | 120 | 13.5 | ||
7 | S180200004 | Front axle | 6 mm | 133 | 15 |
8 | S180200005 | Rear axle | 6 mm | 133 | 15 |
9 | Water bottle bolts | 3 mm | 25 | 2.8 | |
10 | S209900058 | Seatpost Di2 jct A box (20 mm) | 2.5 mm | 7 | 0.8 |
11 | Seatpost hole cover (20 mm) | 2.5 mm | 7 | 0.8 | |
10 | S209900057 | Seatpost Di2 jct A box (0 mm) | 2.5 mm | 7 | 0.8 |
11 | Seatpost hole cover (0 mm) | 2.5 mm | 7 | 0.8 | |
12 | Stem top cap | 4 mm | |||
13 | Stem bolts (faceplate) | 4 mm | 44 | 5 | |
14 | Stem bolts (steerer) | 4 mm | 44 | 5 | |
17 | S212500007 | Headset cap | |||
18 | S202500008 | Compression ring | |||
S222500003 | Press-in headset cup (need 2 for top & bottom) | ||||
18 | S212500016 | Compression ring w/ shim | |||
19 | S162500005 | Headset bearings, upper & lower | |||
20 | S222500002 | Expansion plug | |||
21 | S209900054 | Front derailleur grommet Di2 | |||
22 | S159900006 | Rear derailleur grommet Di2 | |||
S201900002 | FRONT DERAILLEUR BLOCK OFF PLATE | ||||
23 | S179900015 | Front/rear derailleur wireless plug | |||
24 | S179900013 | 7.5 mm angled ICR grommet | |||
S130700014 | Grommet for hydraulic disc brakes | ||||
25 | S216500001 | Front derailleur noodle | |||
26 | 28121-3900 | SW TARMAC CARBON POST 300MM 0 OFFSET | |||
26 | 28121-3910 | SW TARMAC CARBON POST 300MM 20 OFFSET | |||
26 | 28121-3905 | SW TARMAC CARBON POST 380MM 0 OFFSET | |||
26 | 28121-3915 | SW TARMAC CARBON POST 380MM 20 OFFSET | |||
S209900058 | TARMAC SL7 SEATPOST DI2 COVER AND BLOCK OFF KIT, 20MM SEATPOST | ||||
S209900057 | TARMAC SL7 SEATPOST DI2 COVER AND BLOCK OFF KIT, 0MM SEATPOST | ||||
28 | S199900003 | Di2 battery grommet | |||
39 | S202500008 | Compression ring sleeve | |||
S149900018 | Foam ICR sleeve "churro" 11mm OD |