2022-2023 Turbo Como/Vado/Tero (MasterMind TCD)

Specialized MIK HD racks included with all 2022-2023 Turbo Como/Vado/Tero (MasterMind TCD)

YES

All Specialized MIK HD racks are compatible with:

• Optimized Specialized Tailwind panniers
  

• Standard panniers

• MIK accessories

Specialized Front Rack with Adventure Plate

YES

The Specialized Front Rack (98922-5600) can be used with or without the Adventure plate and cargo net

• Rack mounts to the 4-bolt interface behind the steerer tube faceplate
• Rack accepts the MIK adaptor plate and MIK accessories
• Rack includes the Specialized Adventure Plate and cargo net

Standard front racks are not compatible with the suspension fork. 

For assistance with installing the Front Rack, please see your authorized Specialized dealer.

OGK urban iki MIK HD

YES

The standard rack features the MIK HD system to accept these compatible child seats:

YES

• Tow limit: 132 lbs / 60 kg
• See any Turbo Vado, Como or Tero manual for details
• Also refer to the document Riding With Kids

Default MY22 Turbo Vado/Como/Tero 148x12 rear thru axle (derailleur models)

YES

Models w/ standard drivetrains

• Replace the standard thru-axle with a trailer-compatible 148x12mm thru-axle (Syntace standard, pitch 1.0), e.g. from The Robert Axle Project
• Dimensions of default 148x12 thru axle
  • Full Length: 172 mm (outer head - end of axle)
    
  • M12 thread with 1.0 pitch

Models with internally geared hubs

• Thule adaptor 20100798 (this SRAM version works for enviolo as well)
• This adaptor replaces the 15 mm wheel nut on the non-drive-side and allows attaching a trailer hitch to the integrated thread; the hitch is secured with a separate bolt, included with the adaptor
  
• Required tools:
  • 19 mm open spanner to tighten the adaptor on axle
  • 13 mm open spanner to attach the trailer hitch to the adaptor
  • Tip: carry an adjustable wrench to repair a flat out on the road (avoids carrying single 13, 15 and 19 mm spanners)

Vado-compatible Abus Shield 5750 Plus frame lock

YES

FRAME LOCKS (mounted to seat stays)

Requirements:

• Lock must be wide enough to clear fender/tire; fender width: 65 mm
• Lock mount tabs need to be compatible with frame tab spacing
  
• Seat stay tab distance for frame locks (center-center)
  • Vado: 90 mm - recommendation: Abus Shield 5750 Plus
    
  • Como: 100 mm - recommendation: Abus Pro Amparo 4750XL
• Tip for many Abus locks: combine them with the matching adaptor chain that connects to the frame lock; allows securing the bike to a pole, fence etc.

FOLDING LOCKS AND OTHER ACCESSORIES AT TOP TUBE

The top tube rivet nuts in double diamond frames are positioned closer to the seat tube as known from Vado Gen1, for these reasons:

• All frame sizes accept a small folding lock + 26 oz bottle in downtube holder
• Mounting accessories such as pumps or alternative holders without interfering with a large water bottle at down tube
  

Customization tip:

• Use of Wolf Tooth B-RAD Mounting Bases to position accessories individually (would allow mounting a large folding lock or any other larger accessory)

Compatible folding lock at top tube rivet nuts

• Abus Bordo Lite Mini 6055 fits with this separate SH 6055 holder (allows locking frame to smaller pole, but needs to be positioned closely)

Down-tube mounting:

• Compatible with all Vado, Tero and Como frames
• Como Low Entry frames and Vado Step frames either accept a folding lock or a water bottle cage

YES

Suitable 30.9 mm dropper posts with internal routing can be retrofitted