These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability.

Click to order on Specialized.com

  • Accepts most standard bicycle panniers. Note: Third-party panniers are not tested for guaranteed compatibility.
  • Includes two adapters (one per side of fork) and all required hardware.
  • 8 kg (18 lb) max load per side.
  • All required tools for assembly are included with the Haul ST and LT.

For assembly instructions, see the Front Pannier Assembly Guide


Tips for Mounting Coolcave Panniers (and other aftermarket panniers)

The Specialized Coolcave pannier is the most common pannier to attach to the Globe Haul ST and LT. Because it is one of the largest panniers available, it requires some special considerations for setup. Like most panniers, the Coolcave has an adjustable mounting system that allows the pannier body to move fore/aft along the rack. This means that panniers can be set too far forward or backward. Here are some mounting considerations that may also affect other panniers. It is worth noting that these considerations may mean your panniers are set up asymmetrically and they will be right/left specific. 

Example: the first pannier shown below has the mounting system on the far left. The middle pannier has the mounting system on the far right. The last pannier has a centered mounting system.  



Front Panniers:

Front panniers should be as close as possible to centered on the front axle. If the panniers are too far back, your feet may hit the panniers when you pedal or turn. If the panniers are too far forward, your steering may be affected. If we take the first pannier above and mount it on the right side of the bike, it sits too far back. The mounts should be centered on the rail like the example with green arrows above.