Start up your new Globe

If your Haul LT was shipped to you, the battery is only partially charged.

  1. Plug the supplied charger into an outlet and plug the bicycle into the charger as shown in the image below. 
  2. Turn on the bicycle by pressing and holding the FUNCTION button on the HMI display until the display turns on.
  3. The display will briefly show the app pairing key before switching to the main interface.


Download the Specialized Globe app and pair your bike

To get the most out of your Globe experience, download the Specialized Globe app from the App Store or Google Play Store. 

If you already have a Specialized account, you can use your existing email address and password to log into the app. Create a new account with the SIGN UP button in the app.

To pair your bike:

  1. Turn on Bluetooth® in your phone settings.

  2. Turn on the bike (see C in image above).
  3. Select the CONNECT button in the app.
  4. Confirm that the pairing code in the app (last four digits) matches the one on the Globe HMI display. 

Control the motor support

The Globe motor provides six assist modes from 0 to 100% (see A in image below). The default assist is 1 or 20%. Increase the support by pushing the UP button and decrease it by pushing the DOWN button. 

Press and hold the DOWN button for the walk assist function. This is provides motor assist up to 2.5 mph (4 km/h) to help you push the bicycle when you are walking. 

Turn the lights on/off

The front and rear lights automatically turn on when you turn on the bicycle. You can turn the lights on/off by pressing and holding the UP button on the HMI display for 3 seconds. 

The default light mode is low beam. There are seven different light modes for the front light. You can toggle between the modes by using the light button on the right handlebar (C in image below).

For more information on the HMI interface, please see the Owner's Manual.