Globe bikes were designed to fit riders from 4'5" to 6'4". See the instructions below to customize your fit.

Adjust the handlebar height

To adjust the handlebar height, loosen the quill stem bolt (A in image below). Raise or lower the quill stem (B).

Check that the handlebar is perpendicular to the front wheel (C). Use the supplied torque wrench to tighten the quill stem bolt to 20 Nm / 177 in-lbf.

Adjust the handlebar angle

To adjust the handlebar angle (move the handlebars closer or farther away), loosen the faceplate bolts on the stem (A in image below). Rotate the handlebars to the desired angle (B).

Tighten the faceplate bolts in a cross pattern as shown to 10 Nm / 89 in-lbf.

Adjust the saddle height

The Haul ST features a 2-part seatpost to accommodate a wide range of rider heights.

To adjust the upper seatpost, loosen the lower seatpost collar bolt (A in image below), then open the lever on the upper seatpost clamp (B) and adjust the height as desired.

Close the seatpost clamp (B) to lock the upper seatpost in place.

If you need additional height adjustment, you can raise/lower the lower seatpost. Tighten the lower seatpost collar bolt to 6 Nm.

Both the upper and lower seatpost have minimum insertion requirements. Do not raise either seatpost past the minimum insertion line.