替换件
大多数替换件必须通过授权的专业经销商订购和安装。我们致力于提供骑士可以自行安全安装的零配件，并且在 Specialized.com 上架 。经销商可以从Specialized订购的零配件请参考以下清单。它可能不包括所有零配件，并且某些零配件专门为保修情况保留。我们建议在需要更换任何零件时咨询零售商。
SKU | 零件名称 | 描述/注释 |
|---|---|---|
S200200010 | AXL FRONT, ROAD SL THRU-AXLE, 12X100MM, BOLT-ON, 6MM HEX, M12X1.0PX121MM, ALLOY, BLACK | |
S200200011 | AXL REAR, ROAD SL THRU-AXLE, 12X142MM, BOLT-ON, 6MM HEX, M12X1.0PX165MM, ALLOY, BLACK | |
S182600001 | HGR MY18 ROAD DISC THRU AXLE DER HANGER | |
S221900005 | DER MY24 ROUBAIX, FRONT DERAILLEUR HANGER, W/ BOLTS | |
| 特定尺寸MY24 Roubaix前叉 | 亮面黑 |
S179900013 | CBG GROMMET, 5MM HYDRAULIC BRAKE HOSE SPLIT PLASTIC GROMMET - ANGLED TOP, 7.5MM | 车架-后下叉刹车出线孔线堵/前叉-刹车入线及出现孔线堵 |
S186500003 | CBG HOOD SCOOP, DOWNTUBE ENTRY PORT, ELECTRONIC SHIFT ALLOY COFFIN COVER, W/O BOLT | 下管过线盖，用于Di2或无线传动系统装置。 |
S216500009 | CBG HOOD SCOOP, DOWNTUBE ENTRY PORT, MECHNICAL SHIFT ALLOY COFFIN COVER, FOR FULL-LENGTH HOUSING, BOLT-ON, ALLOY, W/ BOLT | 下管过线盖，用于机械变速 |
S130700014 | CBG GROMMET, 5MM HYDRAULIC BRAKE HOSE SPLIT RUBBER GROMMET - FLAT TOP, 6.5MM | 适用于机械变速的前后拨出线孔线堵 |
S179900015 | CBG PLUG, ICR EXIT PORT, RUBBER PLUG W/ S-LOGO - FLAT TOP, 7MM | 适用于无线变速系统的前后拨出线孔线堵 |
S159900006 | CBG GROMMET, DERAILLEUR EXIT PORT, SPLIT RUBBER GROMMET FOR DI2 - 7MM OD X 2.7MM ID | 适用于Di2系统的前拨出线孔线堵 |
S236500003 | CBG GROMMET, ICR ENTRY/EXIT PORT, SPLIT RUBBER GROMMET FOR DI2 WIRE, FLAT TOP, 5.5MM OD X 2.7MM ID X 10MM TALL | 适用于Di2的后拨出线孔线堵 |
S149900018 | CBG CHURRO, SOUND DAMPENING FOAM SLEEVE FOR MTN - 11MM OD | |
28120-3212 | Pave碳纤维座管-450mm×20mm后飘 | |
28120-3202 | Pave碳纤维座管-380mm×20mm后飘 | |
S199900021 | STC WEDGE, MY20 ROUBAIX, SEATPOST WEDGE ASSEMBLY, W/ TI BOLT | |
S199900095 | STC SUB, MY20 ROUBAIX SEATPOST WEDGE COVER | |
S186800006 | STP SUB, TARMAC SL6 / ROVAL PAVE & ALPINIST SEATPOST, DI2 BATTERY MOUNTING KIT | |
| S-Works Future Stem把立 | Future Shock 3.0避震器在安装Future Stem时不需要垫片。 |
| Future Stem Comp | Future Shock 3.0避震器在安装Future Stem时不需要垫片。 |
S182500006 | HDS BEARING, FUTURE SHOCK HEADSET, UPPER OR LOWER BEARING, 45.8MMOD X 36.8MMID X 6.5MM (45X45 DEG) | 上碗轴承 |
S222500004 | HDS BEARING, 1.8" LOWER HEADSET BEARING, 56.8OD X 48.8ID X 6.5MM (45X45 DEG) | 下碗轴承 |
S222500005 | HDS COMPLETE, INTEGRATED, FUTURE SHOCK, 45.8ODX36.8IDX6.5MM UPPER BRG, 1.8" LOWER BRG (45X45 DEG), W/ FULLY ASSEMBLED FS COLLAR, COMPRESSION RING & SPACERS | |
S172500018 | HDS SUB, FUTURE SHOCK HEADSET, SPLIT COMPRESSION RING FOR TOP BEARING | |
S192500018 | HDS SUB, FUTURE SHOCK HEADSET COLLAR, FULLY ASSEMBLED (T73) | |
S172500021 | HDS SUB, FUTURE SHOCK HEADSET, 5MM SPACER FOR FS CARTRIDGE (30MM IDX37MM OD) | |
S192500010 | HDS SUB, FUTURE SHOCK HEADSET, 2-PIECE TOP COVER, SHORT BILL, 15MM STACK | |
S192500011 | HDS SUB, FUTURE SHOCK HEADSET, 1-PIECE TOP COVER, SHORT BILL, 0MM STACK | |
20023-8015 | SW FUTURE SHOCK 3.3 | |
S223100002 | SUS FRK, FUTURE SHOCK, 3.3 CARTRIDGE, W/O STEM SHIM | |
20023-8010 | SW FUTURE SHOCK 3.2 | |
S223100006 | SUS FRK, FUTURE SHOCK, 3.1 CARTRIDGE, W/O STEM SHIM | |
S223100007 | SUS FRK, FUTURE SHOCK, 3.2 / 3.1 CARTRIDGE, TOP CAP & BOLT | |
S223100001 | SUS FRK FUTURE SHOCK 3.0, BOOT ASSY | 适用于所有Future Shock 3.0版本 |
S234800001 | STM SUB, FUTURE SHOCK 3.0, STEM SHIM FOR 1-1/8" STEM (24.5MM ID / 28.6MM OD) | 仅适用于标准1-1/8“把立 |
S233100001 | SUS FRK, FUTURE SHOCK 3.0, MAIN SPRING KIT: FIRM (YELLOW) / MEDIUM (BLACK) / SOFT (BLUE) | |
S233100002 | SUS FRK SUB, FUTURE SHOCK, PRELOAD WASHERS (5 PCS) | |
S200700002 | BRK CENTERLOCK DISC BRAKE ROTOR LOCKRING, INTERNAL SPLINE, 24TPI, 26MM ID X 44MM OD, ALLOY | |
S232200002 | FND SUB, MY24 ROUBAIX, REAR FENDER MOUNTING BRACKET, SIZES 44-52CM | |
S222200012 | FND SUB, MY24 ROUBAIX, REAR FENDER MOUNTING BRACKET, SIZES 54-64CM | |
S195300002 | TOL 3MM HEX OPEN WRENCH WITH SCR,CUST,HEX HD SET,M5X0.8X4.45,316,SST |