2019-2020 Stumpjumper Service & Maintenance
Manuals
Stumpjumper Small Parts Schematic
Stumpjumper Pivot Parts Schematic
TORQUE SPECS
Location | Tool | Torque (in-lbf) | Torque ( Nm) |
|---|---|---|---|
| Seat Collar | 4 mm HEX | 55 | 6.2 |
| 12 mm Rear Axle | 6 mm HEX | 133 | 15 |
| Derailleur Hanger | 2.5 mm HEX | 7 | 0.8 |
| Housing Guides/BB port | 3 mm HEX | 7 | 0.8 |
| Chainstay Protector | T25 TORX | 7 | 0.8 |
| SWAT Latch | T10 TORX | 6 | 0.7 |
| ISCG Tabs | 4 mm HEX | 55 | 6.2 |
Pivot Bolt Location | Torque (in-lbf) | Torque ( Nm) |
|---|---|---|
| Main Axle | 210 | 23.7 |
| Upper Link Seat Tube | 180 | 20.3 |
| Seat Stay Upper Link | 180 | 20.3 |
| Dropout/Horst Link | 180 | 20.3 |
| Extension | 180 | 20.3 |
| Upper Shock Eye | 90 | 10 |
| Lower Shock Eye | 210 | 23.7 |
Suspension Service
The rear shock and suspension forks will need to be serviced at regularly scheduled intervals in order to maintain functionality and performance. These interval times are based on manufacturer recommendation. The manufacturer of suspension parts varies by model and may change year to year. Always refer to the manufacturer of suspension parts for the recommended service intervals. An Authorized Specialized Retailer is the best place to start for proper suspension maintenance.
Washing
Never wash your bike with a high-pressure cleaner or a hose from a very close distance. Please ensure you only use a low-pressure hose to clean sensitive parts like bearings, Future Shock, headset, and wheel hubs, etc. Use a soft brush and a bucket of high-quality bike cleaner to wash off all stubborn dirt. Rinse off your bike with a low-pressure hose to clean off all excess soap. Wipe down your bike with a soft cloth to dry off all excess water. Apply a high-quality bike lube to your chain.