Axles

Front: 110mm Boost, 15mm thru-axle

Rear: 148mm spacing, 12mm thru-axle

Brake Mounts & Rotors

Stock front/rear rotor size: 220mm

Max. front/rear rotor size: 220mm

Chainring

The frame is compatible with 1x drivetrains only.

Smallest possible size: 30t

Largest size w/chain guide: 34t

See the SRAM Chainlength calculator  https://axs.sram.com/guides/chain/calculator for recommended chain length for T-Type transmission setup.

Derailleur hanger

All models use the SRAM Universal Derailleur Hanger (UDH), S202600002. See the SRAM UDH Installation Manual for instructions.

Frames are compatible with either SRAM Transmission or standard drivetrains; however, a specific T-type chainring must be used that is compatible with the Turbo spider. Please contact an Authorized Specialized Retailer or Specialized Rider Care for assistance.

Grease should not be used on any part of the UDH.

Use caution when installing the UDH, the bolt is left hand threaded.  Avoid tightening the UDH bolt with a wheel is installed as this will increase the torque on the axle as well as the UDH bolt.

Water Bottle

All frame sizes (S2-S5) fit a Specialized 26oz water bottle. Cage position may impact bottle compatibility. The optional Range Extender battery fits in the water bottle cage.

A bottle cage with a SWAT tool does not work with a Range Extender battery.

Wheels & Tires

All Kenevo SL models are equipped with 29" wheels. Switching the rear wheel to a 27.5" wheel is not recommended.

The bike is equipped with 2.3" tires; the rear tire maximum width is 2.6"