Frame Specifications
All Como bikes feature low-entry, E5 Aluminum frames with a bottom bracket motor mount, fully integrated & lockable downtube battery, internal cable routing, lock and front rack mount.
Kickstand
- All models feature a chainstay-mounted aluminum kickstand
- 40 mm mount (center-center of mounting holes)
- Provided they fit (mounting, length), alternative kickstands can be installed
IGH models: sliding dropouts, belt compatible
Rear derailleur hanger: AMAZINGER 2.1, MTB RD HANGER
Frame geometry
Measurement | Frame size | ||
---|---|---|---|
S | M | L | |
Stack (mm) | 650 | 671 | 682 |
Reach (mm) | 441 | 465 | 486 |
Headtube Length (mm) | 150 | 170 | 180 |
Headtube Angle (°) | 67 | 67.5 | 68 |
BB Height (mm) | 275 | 275 | 275 |
BB Drop (mm) | 80 | 80 | 80 |
Trail (mm) | 103 | 99 | 96 |
Fork Length (full) (mm) | 487 | 487 | 487 |
Fork Rake/Offset (mm) | 44 | 44 | 44 |
Front Center (mm) | 735 | 762 | 781 |
Chainstay Length (mm) | 470.4 | 470.4 | 470.4 |
Wheelbase (mm) | 1194 | 1221 | 1241 |
Toptube Length (horizontal) (mm) | 630 | 666 | 695 |
Bike Standover Height (mm) | 355 | 355 | 355 |
Seat Tube Length (mm) | 450 | 450 | 460 |
Seat Tube Angle (Virtual) (°) | 73.8 | 73.3 | 73 |
Fork
Como features a 80mm travel fork (lockable to rigid)
Specifications:
- 44 mm offset
- Tapered steerers (1 1/8 - 1 1/2)
- All models with RockShox forks: 110mm spacing and 15mm thru axles
- All models with Suntour forks: 100mm spacing and 15mm thru axles
- PM 160 brake mounts
- Through-hole in fork crown to mount fender and the front light
Headset & Cockpit
All models use a custom Specialized handlebar/stem assembly, featuring the same shape/dimensions as used on Como SL, but without integrated cable routing in the handlebar/stem.
Using a traditional bar/stem combination is not possible and not needed since the specified design is tailored for the Como experience.
- Handlebar: 680 mm bar width, 29° backsweep
- Headset: All bearings fully integrated; upper: 1.125" Campy-style 45° cartridge bearing; lower: 1.5" 36° inner and 45° outer cartridge bearing
Seatpost
When adjusting the saddle height or installing an aftermarket dropper post, it is important to ensure the insertion depth is within the acceptable range.
Seat Post Length | Seat Post Maximum Insertion | Seat Post Minimum Insertion | |
---|---|---|---|
S | Suspension (4.0 and 5.0 models): 350mm Non-suspension (3.0 models): 375mm | 220mm | 80mm |
M | Suspension (4.0 and 5.0 models): 400mm Non-suspension (3.0 models): 435mm | 240mm | |
L | Suspension (4.0 and 5.0 models): 400mm Non-suspension (3.0 models): 500mm | 250mm |
All models use a 30.9mm seat post and a 42.9mm seat collar.