Compatible Parts
For more information on aftermarket component compatibility, see the Creo 2 Rider Workbook.
Frame | Notes |
---|---|
Headset bearings | Upper (45.8 x 36.8 x 6.5 x 45°) Lower (56.8 x 47.8 x 6.5 x 45°x 45°) |
Headset collar | See manual for headset adjustment instructions |
Seat post/clamp | 31.8 mm clamp; 27.2 mm post Internally-routed dropper compatible |
Axles | Front 12 x 100 mm Rear 12 x 142 mm |
Brake Rotor Min/max | 160 / 180 front and rear |
Fork/Future Shock | Future Shock-specific fork: FS 3.0 for S-Works, Expert, Comp Carbon |
Drivetrain | |
Chainring min/max | Min/max: 42 / 48t S-Works, Expert, Comp Carbon: 107 bcd Chainguide included on S-Works, Expert, Comp Carbon |
Front derailleur | 1x only |
Rear derailleur hanger | S182600001 Road Disc Thru-Axle 2.0 Hanger |
Wheels | |
Tires | 29" x 2.2" fits without fenders; minimum recommended tire width of 38mm Note: fenders will reduce maximum tire width |
Tubeless compatibility | Rims and tires on all models are tubeless compatible |
Accessories | |
Water bottle mounts | 4: top tube, down tube, fork (2) |
Racks | Compatible with front and rear racks |
Fenders | Fender mount included, see below Compatible with 52mm Dry-Tech fenders; narrower fenders are compatible with narrower tires |
Kickstand | Not compatible |
Fender Installation Instructions
Creo 2 uses a seat stay bridge (found in the small parts box) to mount the rear fender. 52mm Dry-Tech fenders are compatible. Narrower fenders will fit with narrower tires.