The majority of replacement parts must be ordered through and installed by an Authorized Specialized Retailer. We are constantly reviewing the parts that can be safely installed by riders, and making some available for purchase directly on Specialized.com. The below list of parts is a reference for what retailers can order from Specialized. It may not include every part, and some parts are reserved specifically for warranty cases. We recommend always consulting a retailer when replacement parts are needed. 

Service Parts

SKUDescriptionNotes
98921-5634Specialized U2-710 Battery (Service-AM) Single pack
(SBC-20)		Smaller 530Wh (SBC-19) battery not carried as a Service or AM part
S170200003AXL THROUGH AXLE, JD JD-QR43, 7075-T73 AXLE W/C6801 WASHER, REAR, 148MM SPACING, 172MM LENGTH, 12MMRear thru-axle for all non-IGH models
S210800012BAR MY22 VADO JD-MTB556A,31.8MM,BACK SWEEP 15DEG,RISE 46MM,UP SWEEP 5DEG, 680MMHandlebar equipped on all models
S210500017BLT MY22 VADO/TERO BATTERY LATCH MOUNTING HARDWARE
S210500016BLT MY22 VADO/TERO FRAME LOCK HARDWARE KIT
S210500015BLT MY22 VADO/TERO MOTOR MOUNTING HARDWARE KIT
S216500008CBG MY22 VADO/TERO CABLE ROUTING KITCable guide kits for all models
S211200010CHG VADO CHAIN GUARD, 48T, PRAXISSame as S179900050
S211400005CHR VADO, PRAXIS 48T, 104BCD, SINGLE WAVE STYLE 10/11 SPEED, W/ BOLTSStock chainring for all non-IGH models
S211600026CRK MY22 VADO PRAXIS SPIDER, 104BCD, VERSION C, IGHSpider for IGH equipped models
S195100001CRK MY19 LEVO FSR SPIDER,104BCD,PA TRAIL FSR D2Spider for Rear Derailleur equipped models
S166800011ELE MY16 LEVO ISIS GROOVE NUT

Spider lock-ring for all models 

Use with either Park Tool BBt-18 or Shimano TL-UN96

S211600027CRK MY22 VADO/TERO FORGED ALLOY, PRAXIS, DRIVESIDE, 170MMSingle length for all models & sizes
S211600028CRK MY22 VADO/TERO FORGED ALLOY, PRAXIS, NON DRIVESIDE, 170MMSingle length for all models & sizes
S211700002CRR MY22 VADO GARMIN RADAR BRACKET WITH HARDWAREBracket to mount Garmin Radar on rear Fender - bolts to underside of rear rack
S211700003eCRR MY22 VADO REAR RACK W/ HARDWARERear rack w/ mount for Spanniga  integrated tail-light
S216900004CSP MY22 VADO/TERO CHAINSTAY PROTECTOR, CO-MOLDEDChainstay protector for all models
S216000003DRO MY22 VADO/TERO DROPOUT SLIDER HARDWARE KITBolts & washers for slider dropouts-IGH models
S216000004DRO MY22 VADO/TERO DROPOUT SLIDER, DRIVESIDE, W/ HARDWAREDS Slider dropouts-IGH models
S216000005DRO MY22 VADO/TERO DROPOUT SLIDER, NON DRIVESIDE, W/ HARDWARENDS Slider dropouts-IGH models
S216800051ELE MY22 VADO TERO CHARGE DOORCharge port magnetic cover
S216800027ELE MY22 SPECIALIZED DRIVE C MAG HORIZONTAL, 25KMH

2.0E - 50 Nm Max Torque
(E57028)

Vado 3.0 models

S216800028ELE MY22 SPECIALIZED DRIVE S MAG HORIZONTAL, 25KMH

2.2 - 90 Nm Max Torque
(E06855)

Vado 5.0 models

S216800029ELE MY22 SPECIALIZED DRIVE T MAG HORIZONTAL, 25KMH

2.0 - 70 Nm Max Torque
(E57026)

Vado 4.0 models

S226800003ELE MY22 SPECIALIZED DRIVE T MAG HORIZONTAL, 28MPH (USA SPEC)

2.0 - 70 Nm Max Torque
(G23959)

USA Spec Vado 4.0 models

S216800033ELE MY22 VADO 5 & S, 3 CABLE Y SPLITTER FOR RADARY-Splitter for Garmin Radar equipped models
S216800034ELE MY22 VADO/TERO BATTERY TO MOTOR CABLEMotor-to-battery harness for Vado 3.0 & 4.0 models
S216800025ELE LEVO FSR SPEED SENSOR CABLESpeed sensor cable, all models (shared part with G2 & G3 Levo)
S216800038ELE MY22 VADO/TERO SPEED SENSOR HOLDER
S216800035ELE MY22 VADO/TERO CHARGE PORT COVER W/ LATCH
S216800036ELE MY22 VADO/TERO LOWER BATTERY MOUNT W/ LOCK HARDWARE
S216800037ELE MY22 VADO/TERO REAR LIGHT CABLE, 12V, 2 WIRESRear light wire - used on all models
S225800006LGT REAR, SPANNIGA COMMUTER GLOW R581001, INTEGRATED RACK MOUNT, W/O WIREReplacement rear light without wire; order part S216800037 above for wire
S194200016SUB MY19 LEVO FSR SPEEDSENSOR-MAGNET KIT6-bolt speed sensor magnet for Rear Derailleur equipped models
S199900012MSC SPEED SENSOR MAG HOLDER,CENTERLOCK,ASSY,LOCK RINGCenterlock speed sensor magnet - for Vado 3.0 models
S216800039ELE MY22 VADO/TERO SPEED SENSOR MAGNET, 6BOLT6-bolt speed sensor magnet for IGH rear hubs
S216800040ELE MY22 VADO/TERO UPPER BATTERY MOUNT W/HARDWARE
S216800041ELE TCD-W 2, WIRED DISPLAY WITH REMOTEMasterMind TCD-w
48119-1405TURBO CONNECT DISPLAY – MTB MOUNT31.8mm handlebar mount for MasterMind TCD-w
S212200007FND MY22 VADO 650B FRONT FENDER SET FOR SRAM FORK

Vado 5.0 models equipped with Sram fork

65C width

S212200008FND MY22 VADO 650B FRONT FENDER SET FOR SUNTOUR FORK

Vado 3.0 & 4.0 models equipped with SR Suntour fork

65C width

S212200009FND MY22 VADO 650B REAR FENDER SETVado 3.0 & 4.0 models

65C width
S212200010FND MY22 VADO 650B REAR FENDER SET WITH HOLE FOR GARMIN RADARVado 5.0 models equipped with Garmin Radar

65C width
S172600003HGR MY17 DER HANGER AMAZINGER 2.1R. Derailleur hanger for all Non-IGH Models
S212500020HDS COMPLETE, INTEGRATED, 1-1/8" UPPER (45X45), 1.5" LOWER (36X45), W/ SPLIT CROWN RACE (NO TOP COVER) (HS-S-01)Headset assembly for all models - Does not include FlowSet compatible  top cover
S154800020

STM MY15 SIRRUS/VITA FLOW-SET STEM CONE SPACER 52MM OD 15MM HEIGHT

52mm OD headset top cover
S154800007STM MY15 TURBO / SIRRUS / VITA FLOW-SET STEM SPACER 10MM10mm FlowSet steerer spacer
S154800008STM MY15 TURBO / SIRRUS / VITA FLOW-SET STEM SPACER 5MM5mm FlowSet steerer spacer
S179900050MSC MY17 VADO 48T PLASTIC BASH GUARDPlastic Chainring guard Same as S211200010
S219900009MSC MY21 COMO SL BELT, CDX, 122TCarbon Belt for IGH equipped Models
S219900062MSC MY22 COMO KICKSTAND HARDWARE KITUsed on non-IGH Models
S179900045MSC MY17 VADO SPECIALIZED REAR 40MM, BLACK, W/ THREADS IN KICKSTAND, W/O BOLTS, W/ PLASTIC FOOT, BLACKKickstand used on all models
S219900051MSC MY22 VADO/TERO BATTERY LOCK CYLINDER(5599 06 95)
S219900052MSC MY22 VADO/TERO CHAIN COVERChain guard for all models
S219900053MSC MY22 VADO/TERO DOWNTUBE BATTERY COVERSingle cover for all frames & sizes & capacity batteries
S219900054MSC MY22 VADO/TERO DROPOUT COVERDS & NDS sliding drop-out cover kit for IGH equipped models
S219900056MSC MY22 VADO/TERO MOTOR COVER KITDS & NDS motor cover kit, includes bolts
S213700010RIM TURBO, 650B, FRONT & REAR, ALLOY, 32H, DISC, 30MM INTERNAL (SD30)- BLACK W/ TURBO DCLFront & Rear rim for all models
S154800016STM MY15 SIRRUS/VITA FLOW-SET STEM 31.8 20 DEG RISE 60MM BLACK60mm FlowSet Stem, all models 
(sizes Sm. / Med.)
S154800017STM MY15 SIRRUS/VITA FLOW-SET STEM 31.8 20 DEG RISE 75MM BLACK75mm FlowSet Stem, all models
(sizes Lrg. / XL)
S184700003STC MY18 EPIC SEAT COLLAR 34.9 MM WITH TI BOLT34.9mm seatpost collar compatible with all models
S214900008STP SEATPOST ALLOY, 30.9 MM, OFFSET 0MM, 400MM, 2 BOLT CLAMPRigid seatpost OE on Vado 3.0 models
S215500023WHL TURBO, 650B, FRONT, ALLOY, TA, 15X100MM, DISC, 6-BOLT, 32HFront wheel for SR Suntour Fork equipped models
S215500024WHL TURBO, 650B, FRONT, ALLOY, TA, 15X110MM, DISC, 6-BOLT, 32HFront wheel for Sram fork equipped models
S225500001WHL TURBO, 650B, REAR, ALLOY, 10X135MM BOLT-ON, DISC, 6-BOLT, 32H - ENVIOLO CTRear wheel with Enviolo City rear hub - 3.0 IGH Models
S225500002WHL TURBO, 650B, REAR, ALLOY, IGH BOLT-ON, 10X135MM, DISC, 6-BOLT, 32H - ENVIOLO HDRear wheel with Enviolo Heavy Duty rear hub - 5.0 IGH Models
S215500022WHL TURBO, 650B, REAR, ALLOY, TA, 12X148MM, DISC, 6-BOLT, 32H, SHIMANO 11-SPD FHBRear wheel for non-IGH models
S202100001FHB BEAR PAWLS, TA, SHIMANO 10-SPD, STEEL, 3 PAWL (HFH-0001) (BMB-00412O1A / BEB-51412P1A)FHB for rear wheel of non-IGH Vado 4.0 & 5.0 models

Spokes

Spoke lengths apply to default wheel setup and in combination with 12 mm nipples.

MODEL

 

SPOKE LENGTHS
FRONT

SPOKE LENGTHS
REAR

Drive Side

Non-Drive-Side

Drive Side

Non-Drive-Side

Vado 5.0 IGH262 mm261 mm246 mm244 mm

Vado 5.0

262 mm261 mm261 mm
262 mm
Vado 4.0262 mm261 mm261 mm262 mm
Vado 3.0 IGH266 mm265 mm265 mm266 mm
Vado 3.0266 mm265 mm265 mm266 mm