Control 148
Setup
Tubeless Compatibility
All Control wheels have tubeless-ready tape installed from the factory. 30mm wide tape should be used for replacement.
Tubeless valve stems are included with wheelsets: S204200010 - SUB TUBELESS VALVE STEM 40MM LONG
Spoke hole plugs may be used as a lightweight alternative to rim tape: S179900039 - MSC MY18 CONTROL SL SPOKE PLUGS (BAG / 50)
Rim Width & Approved Tire Sizes
Model | Rim Width (internal) | Approved Tire Sizes |
---|---|---|
Control 148 | 29mm | 1.95 - 2.6" |
Recommended Inflation Pressure
Tubeless Max | Tubed Max |
---|---|
40psi | 40psi |
Replacement Parts
Rims
Model | Position | Description | Colorway | Part Number |
---|---|---|---|---|
Control 148 | FRONT & REAR | RIM MY19 CONTROL 29, FRONT & REAR, ALLOY, 28H, 30MM INTERNAL | BLACK W/ CHARCOAL DCL | S193700009 |
Rim Width & Approved Tire Sizes
Rim Width (internal) | Approved Tire Sizes |
---|---|
21mm | 700x24c - 47c" |
Spokes & Nipples
Model | Position | Manufacturer | Manufacturer Part Number | Description | Color | Part Number |
---|---|---|---|---|---|---|
Control 148 | ALL POSITIONS | DT SWISS | SCR020287S0500 (Replaced by S224600071) | SPK DT, COMPETITION RACE, 287MM, J-BEND, 14G, 2.0X1.6MM | STAINLESS, BLACK | S204600081 |
Control 148 | ALL POSITIONS | DT SWISS | NPAC20140S0500 | NPL DT SWISS PROLOCK ALLOY HEX 2.0MM(14G)X14MM BLK (NPAC20140S0500) | STAINLESS BLACK | S2027005 |
Lacing & Tension
Drive-side rear spokes and rotor-side front spokes should be at 1100-1200N of tension when the wheel is complete.
Model | Position | Pattern | Spoke Count |
---|---|---|---|
Control 148 | FRONT SPOKE-DRIVE SIDE | 2-Cross | 14 |
Control 148 | FRONT SPOKE-NON DRIVE SIDE | 2-Cross | 14 |
Control 148 | REAR SPOKE-DRIVE SIDE | 2-Cross | 14 |
Control 148 | REAR SPOKE-NON DRIVE SIDE | 2-Cross | 14 |
Hubs
Control 148: DT Swiss 360 internals, SRAM XD driver
Control wheels are Boost spacing, front: 15x110 and rear: 12x148mm.
Model | Position | Description | Part Number |
---|---|---|---|
Control 148 | FRONT | HUB ROVAL, FRONT, TA, 15X110MM, 28H, DISC, 6-BOLT, J-BEND FLANGE, W/ 19MM OD END CAPS | S192800001 |
Control 148 | REAR | HUB ROVAL, REAR, TA, 12X148MM, 28H, DISC, 6-BOLT, SRAM XD, DT 360 3-PAWL | S192800003 |
Bearings
Standard sealed bearings are used in the Control 148 hubs.
Model | Position | Bearing Spec and Size | Manufacturer Part Number |
---|---|---|---|
Control 148 | FRONT HUB - BOTH SIDES | BRG ENDURO BEARINGS 20 X 32 X 7 (6804) | S2025009 |
Control 148 | REAR HUB - BOTH SIDES | BRG NBK BEARINGS 15 X 28 X 7 (6902-2RS) 4 PER HUB | S130600003 |
Freehubs
Control 148 wheels use a SRAM XD driver.
Endcaps
19mm and 31mm endcaps are available for the front hubs. All endcaps are for 15x110 front axle spacing. These endcaps are semi-press fit in the hub. To remove an endcap, the front axle can be used to gently leverage the endcap out. To install endcaps, a cassette tool can be used to press in the new endcap.
Model | Position | Part Number | Description |
---|---|---|---|
Control 148 | FRONT | S195900002 | EDC FRONT, L+R SET, TA, 15X110MM, 31MM OD, FOR ROVAL MTN HUB |
Control 148 | FRONT | S195900003 | EDC FRONT, DS OR NDS END-CAP, TA, 20X110MM, FOR ROVAL MTN HUB |
Control 148 | FRONT | S195900001 | EDC FRONT, L+R SET, TA, 15X110MM, 19MM OD, FOR ROVAL MTN HUB |
Control 148 | REAR NON DRIVE SIDE | S115900021 | EDC REAR, NDS, TA, 12X142/142+/148MM, FOR DT 240/350 BASED DISC HUBS |
Control 148 | REAR DRIVE SIDE | S115900020 | EDC REAR, DS, TA, 12X142MM FOR SHIMANO 10-SPD |
Manuals & Documents
USER MANUAL: Roval Road and Mountain Wheelsets Owner's Manual
User Manual - DT Swiss Ratchet EXP