Terra CLX 2020-2022
Set Up
Valve Stems
Terra wheels are tubeless ready. Tubeless valve stems are included with wheelsets:
Description | Part Number |
|---|---|
| 50mm alloy valve w/removable core, black ano body, black ano nut, black cap, includes red seal | S195500009 |
Rim Tape
Terra wheels are shipped with tubeless ready tape installed from the factory.
Tape Width |
|---|
| 27mm |
Rim Plugs
Spoke hole plugs may be used as a lightweight alternative to rim tape
Position | Part Number |
|---|---|
| FRONT & REAR | NOT COMPATIBLE |
Rim Width & Approved Tire Sizes
Rim Width (internal) | Approved Tire Sizes |
|---|---|
| 25mm | 700x28-47c |
Recommended Inflation Pressure
Tire Size | Tubeless Max | Tubed Max |
|---|---|---|
700x28-32c | 80psi | 90psi |
700x33-36c | 65psi | 85psi |
700x37-42c | 60psi | 75psi |
FAQ
Q: Can Terra wheels be converted to tubeless?
A: Yes! See our Tubeless Conversion page for more information.
Q: May Terra wheels be used with rim brakes?
A: No, Terra wheels have been optimized for use with disc brakes only.
Q: Are there any weight limitations for Terra wheels?
A: Roval wheelsets with carbon rims have a maximum structural weight limit of 275 pounds (125 kg) for 2020 and later models; earlier models have a structural weight limit of 240 pounds (109 kg).
Replacement Parts
Rims
Model | Position | Description | Colorway | Part Number |
|---|---|---|---|---|
| TERRA CLX FRONT | FRONT RIM | CARBON CLINCHER, 700, DISC, 21 HOLES, 25MM INNER WIDTH, 32MM DEEP | SATIN CARBON/GLOSS BLACK | S203700011 |
| TERRA CLX REAR | REAR RIM | CARBON CLINCHER, 700, DISC, 24 HOLES, 25MM INNER WIDTH, 32MM DEEP | SATIN CARBON/GLOSS BLACK | S203700012 |
Rim Width & Approved Tire Sizes
Rim Width (internal) | Approved Tire Sizes |
|---|---|
| 25mm | 28-42c |
Spokes
Model | Position | Manufacturer | Manufacturer Part Number | Part Number | Part Number |
|---|---|---|---|---|---|
| TERRA CLX FRONT | DRIVE SIDE | DT SWISS | SATS20264S05000208 | AEROLITE, 2.0 X 2.3mm, 14G STRAIGHT PULL T-HEAD, L: 276mm | S174600021 |
| NON DRIVE SIDE | DT SWISS | SATS20264S05000208 | AEROLITE, 2.0 X 2.3mm, 14G STRAIGHT PULL T-HEAD, L: 274mm | S174600020 | |
| TERRA CLX REAR | DRIVE SIDE | DT SWISS | SATS20264S05000208 | AEROLITE, 2.0 X 2.3mm, 14G STRAIGHT PULL T-HEAD, L: 272mm | S174600019 |
| NON DRIVE SIDE | DT SWISS | SATS20264S05000208 | AEROLITE, 2.0 x 2.3mm, 14G STRAIGHT PULL T-HEAD, L: 277mm | S204600094 |
Lacing & Tension
Drive-side rear spokes and rotor-side front spokes should be at 1100-1200N of tension when the wheel is complete.
Model | Position | Pattern | Spoke Count |
|---|---|---|---|
| TERRA CLX FRONT | DRIVE SIDE | Radial | 8 |
| NON DRIVE SIDE | 2-Cross | 16 | |
| TERRA CLX REAR | DRIVE SIDE | 2-Cross | 16 |
| NON DRIVE SIDE | 1-Cross | 8 |
Hubs
DT Swiss internals are used for the Terra wheels. All models are through axle, disc brake only.
Model | Position | Description | Colorway | Part Number |
|---|---|---|---|---|
| TERRA CLX FRONT | FRONT HUB | AFD01-F-14-7, DT 240 BEARING, CENTER LOCK DISC MOUNT, 12mm ENDCAPS | BLK/LASER ETCH | S182800005 |
| TERRA CLX REAR HG | REAR HUB | AFD02-R-240-8-16, DT 240 BEARING, CENTER LOCK DISC MOUNT, 142x12mm ENDCAPS,NEW RATCHET EXP | BLK/LASER ETCH | S202800004 |
| TERRA CLX REAR XDR | REAR HUB | AFD02-R-240-8-16, DT 240 BEARING, CENTER LOCK DISC MOUNT, 142x12mm ENDCAPS,NEW RATCHET EXP,SRAM XD-R | BLK/LASER ETCH | S202800004 |
Bearings
Position | Description | Part Number |
|---|---|---|
Front – Drive Side | 6802 ESB/ESNB L | HSBXXX00N2464S |
Front – Non Drive Side | 6802 ESB/ESNB L | HSBXXX00N2464S |
Rear – Drive Side | 1526 ESB/ESNB L | HSBXXX00N3741S |
Rear – Non Drive Side | 1526 ESB/ESNB L | HSBXXX00N3741S |
Freehubs
Terra CLX use 36T Ratchet EXP engagement rings.
| S202100003 | FHB DT240 11SPD SHIMANO, STD BEARING, 142X12 ENDCAP,NEW RATCHET EXP,HWYABL00E8652S |
| S202100007 | FHB DT240 XD-R, STD BEARING, 142X12 ENDCAP, NEW RATCHET EXP,HWYABL00E8650S |